Form/Concrete Release Fluids

Mineral & vegetable oil based

Form Oil 204C

A mineral- and vegetable-oil blend with a parting agent that forms a soap film between the form and concrete for clean release. Rust inhibitors help protect steel forms during storage, while the formulation helps reduce buildup and staining.

Typical applications: Concrete molds and steel forms; clean release and storage rust protection.

Mineral oil based

Form Oil 205

A mineral-oil release agent with wetting and parting additives for concrete product manufacturing. Designed for easy release and rust protection on metal forms, with low-temperature sprayability.

Typical applications: Concrete product manufacturing; metal forms and cold-weather spraying.

Mineral oil based

Form Oil 210

A premium mineral-oil form fluid with wetting and parting agents for easy concrete release. Provides rust protection on metal forms and low-temperature sprayability to help reduce the need for heating.

Typical applications: Concrete manufacturing; easy release and spray application.

Vegetable oil based

Form Oil VGX

A vegetable-oil form fluid for wet-pack and dry-pack concrete. Its parting agent creates a nonstick film to help reduce buildup, while rust inhibitors protect metal forms. Light color and low-temperature sprayability support clean application.

Typical applications: Wet-pack and dry-pack concrete; vegetable-based release-fluid selection.

Water based

Form Release 60

A white, water-based release fluid for precast concrete using metal, plastic, fiberglass or wood forms. Spray or swab onto the form and use immediately or allow it to dry. A thin coating allowed to dry for about one hour helps produce a smooth finish with fewer bugholes and worm tracks.

Typical applications: Wet-pack and dry-pack precast concrete; smooth surfaces and well-filled corners.

Water-mixable concentrate

Asphalt Release LT

A water-mixable release concentrate for road and roofing asphalt. Helps reduce sticking on rubber-tired rollers, truck beds and equipment, and mixes with hot or cold water without a sticky residue.

Typical applications: Asphalt handling and equipment release; a separate application from concrete forms.

Mixing guide: 1 part concentrate to 10 parts water for general asphalt release; 1 part concentrate to 5 parts water for rollers and truck beds. Do not mix with other emulsions or release agents. This is a release agent, not an asphalt resurfacing emulsion, flux or extender.