Chain Protection
Match lubrication to pin, bush and roller contact under load.
Specialty Lubricants
High Temp Oven Chain Oil
Keep hot conveyor chains moving.
QA Bakery Oven oils and Summit chain lubricants for bakery conveyors and selected industrial high-temperature applications. Match the formulation to the equipment, temperature and lubrication system.
View products in our store
Bakery conveyors & industrial ovens
The right film in a demanding environment.
Heat, load and repeated movement challenge oven conveyor lubrication. Fluid selection should address penetration into chain joints, wear, evaporation and residue that can restrict movement or prevent fresh lubricant from reaching the friction points.
Bakery conveyor systems are a frequent application for our QA oils. Suitable high-temperature ovens in other industries may also benefit, subject to equipment and application review.
Residue Control
Consider evaporation, deposits and the condition of the existing chain.
Delivery System
Review feed rate, application location and solids compatibility.
Food-Grade Options
Choose documented qualifications where incidental food contact is possible.
QA product range
QA Bakery Oven Oils
Choose from three QA products. Contact our team for formulation, viscosity, operating-temperature and food-contact details; product names alone do not establish these properties.
Oven conveyor lubricant
QA Bakery Oven 460
A QA option for high-temperature oven lubrication, including bakery oven conveyor systems. Contact QA to match the fluid to your chain, lubrication equipment and operating conditions.
Availability and pricingOven conveyor lubricant
QA Bakery Oven 2
A QA lubricant for high-temperature oven conveyor service. Review the actual chain temperature, load, application method and current lubricant with our technical team.
Availability and pricingOven conveyor lubricant
QA Bakery Oven 2M
A QA option for bakery oven conveyor systems and other suitable high-temperature ovens. Ask QA to confirm formulation details and suitability for your equipment.
Availability and pricingSummit product range
Summit Oven & Conveyor Chain Lubricants
Industrial, synthetic, food-grade and solid-containing formulations. Each serves specific conditions; this is a selection guide, not an equivalency chart.
Synthetic · industrial / NSF H2
Summit CO-95 Tenter Chain Oil
Synthetic lubricant for hot roller chains in applications such as fiberglass, rockwool and gypsum ovens. Formulated to limit evaporation and residue while protecting against wear. Summit recommends automatic lubrication.
Availability and pricingFood-grade · white solid lubricants
Summit CO-120 FG Extreme
A synthetic food-grade chain lubricant with white solids for demanding hot-chain service. Applications include transport and plate-carrier chains in bread, tortilla and pizza ovens. Review lubricant delivery and chain temperature with QA.
Availability and pricingPetroleum / synthetic blend · industrial
Summit CO-150 Tenter Chain Oil
Blended petroleum and synthetic lubricant for tenter chains and hot oven conveyors. Designed for chain penetration, adhesion and wear protection, with oxidation resistance to reduce gumming and thickening.
Availability and pricingEster-based · NSF H1
Summit CO-220 FG
Food-grade ester chain oil for drive, control and transport chains in bakery and other food-industry equipment. Low evaporation and deposit formation help support clean high-temperature operation.
Availability and pricingSynthetic · industrial / NSF H2
Summit CO-250 High Temperature Chain Oil
Synthetic lubricant for hot roller chains, including particleboard and laminate production. Also used for steel belts and heated press platens. Designed for penetration, low evaporation and reduced residue.
Availability and pricingTackified petroleum oil · industrial
Summit CO-320P
Petroleum-based chain lubricant with a tackifier for severe shock loads and demanding environmental conditions. A distinct industrial chain option; review its fit rather than assuming interchangeability with bakery oven lubricants.
Availability and pricingBiosynthetic · food-grade / white graphite
Summit EnviroTech CO-68 FG
Food-grade biosynthetic lubricant with white graphite for hot conveyor chains, including bakery applications. Agitate before use to distribute the solid lubricant evenly.
Availability and pricingBiosynthetic · food-grade / white graphite
Summit EnviroTech CO-150 FG
The higher-viscosity option in the EnviroTech CO FG chain-lubricant series. Supports hot-chain lubrication in bakery and selected industrial ovens. Agitate before use to distribute the white graphite.
Availability and pricingSummit data at a glance
Compare formulation profiles.
Published typical values, not specification limits. Viscosity is only one part of product selection.
| Product | Formulation / application context | Typical viscosity, cSt at 40°C |
|---|---|---|
| CO-95 Tenter Chain Oil | Synthetic · industrial / NSF H2 | 105 |
| CO-120 FG Extreme | Food-grade · white solid lubricants | See product data |
| CO-150 Tenter Chain Oil | Petroleum / synthetic blend · industrial | 127 |
| CO-220 FG | Ester-based · NSF H1 | 220 |
| CO-250 High Temperature Chain Oil | Synthetic · industrial / NSF H2 | 250 |
| CO-320P | Tackified petroleum oil · industrial | 368.5 |
| EnviroTech CO-68 FG | Biosynthetic · food-grade / white graphite | 67.5 |
| EnviroTech CO-150 FG | Biosynthetic · food-grade / white graphite | 147 |
Sources: linked Summit product pages and product information sheets above. The current manufacturer name is EnviroTech CO FG Series, available here as CO-68 FG and CO-150 FG.
Application guide
Get the lubricant to the working parts.
Measure the right temperature.
Review actual chain temperature and temperature at the lubrication point, rather than using the oven setpoint alone. An oil flash point is not a continuous operating-temperature rating. Solid-containing products require review of both the liquid carrier and the remaining solid film.
Review the delivery equipment.
Confirm pump, nozzle, brush or automatic-feed compatibility, flow and application location. Excessive heat at the application point can evaporate the carrier before lubricant reaches the chain joints. Follow the equipment and lubricant suppliers’ recommendations.
Keep solids evenly distributed.
For solid-containing formulations, review storage, mixing and feed-system requirements. Summit specifically instructs users to agitate EnviroTech CO FG before use so the white graphite is distributed evenly.
Plan cleaning and changeover.
Inspect for restricted joints and deposits. Review the existing lubricant and cleaning procedure before changing products. A new formulation cannot reach the contact surfaces if hardened residue blocks the lubrication path.
Application background: Klüber guidance on oven-chain lubrication.
Food processing applications
A bakery application does not automatically mean food-grade.
Review the exact lubricant and required registration for the application. H1 covers incidental food contact; it does not permit deliberate direct food contact. H2 products are intended for areas where food contact is not permitted. The CO-95 and CO-250 sheets list H2; CO-220 FG lists H1. Summit identifies CO-120 FG Extreme and EnviroTech CO FG as food-grade options. Confirm current documentation and your facility’s requirements with QA.
Explore Summit’s oven conveyor chain range · Summit food-grade product information
Technical support
Tell us about your oven and conveyor.
Share the chain and oven model, actual temperatures, speed, load, lubrication method, current product and food-contact requirements. Call 1.877.877.6221 or email info@qalube.com for selection, availability and pricing.
Find your high-temperature chain lubricant.
Review the QA and Summit options with our technical team.